* Getting started with moo.el *

  by Puff the Fractal Dragon

    This should get you started with the moo.el client, an ELISP module
for GNU EMACS.  Moo.el is extremely useful, particularly if you're adept
with GNU EMACS, but this help file is aimed at somebody who's never even
used GNU EMACS before, so DON'T PANIC (kudos to Douglas Adams).


NOTE:   Many players have contacted me asking where they can get a copy
of mud.el or moo.el.  I never discussed this because the help object
is intended to be used by those who already HAVE moo.el but don't know
how to use it.  JoeFeedback is the creator and sole distributor of
moo.el.  He requests that users do NOT distribute it, as he wishes to
track its use and testing for purposes of further enhancements.
* A Note About Terminology *

Ctrl-Anything
     ...means hold down the Control key and press another key.  

Esc Anything
     ...means press the Escape key (or meta key if you're not on an MS-DOS
compatible keyboard), let it up, THEN press another key.  

Esc x blah-blah  or  Ctrl-X blah-blah
     Often I'll use this where blah-blah is a set of commands.  You do
either Esc x or Ctrl-x and wait a moment, and either "M-x" or "C-x" will
appear on the bottom line of your screen.  Start to type blah-blah.  

Tab  and  ?
     While typing blah-blah, if you press Tab, EMACS will try to complete
the command for you.  If you press Tab twice, or press ?, EMACS will list
the possible completions of the command.  You can continue typing and using
Tab until you get the entire command, then press [enter].

* Starting up *

     Assuming you have GNU EMACS on your system, you start it up by
entering "EMACS [enter]" from the prompt.  If you have more experience 
with EMACS you can set it up so it automatically loads moo.el, but for
now, use:

Esc x load-file [enter] moo.el [enter] 

* Connecting *

     Connect to a mud with:

Esc x mud [enter] mudname [enter].  

        If you don't know the mud's name, you can use completion, or type ?
to get a list of the muds in your .moo_worlds file.

* The .moo_worlds file *

If you want to add new muds that aren't in the list, you have to edit the 
.moo_worlds file (you should have gotten a basic .moo_worlds file when you
got moo.el).  To add new muds to your .moo_worlds file, you can either edit
it directly, or use:

Esc x mud-add-world [enter]
World name: LambdaMOO [enter]
Login name: player's name <I suggest you leave this blank> [enter]
Password: player's password <I suggest you leave this blank> [enter]
Address: lambda.parc.xerox.com [enter]
Port number: 8888 [enter]
Type: MOO [enter]

     You may find it handy to make more than one entry for your favorite
muds.  You can connect to two different characters at once, but only if you
have two different entries for that mud in .moo_worlds.  I use LambdaMOO
and lambda, for example.  If I tried to use LambdaMOO twice, moo.el would
just switch me back to the LambdaMOO buffer (more about buffers later).

* Fun with moo.el for MOO *

     Once you've connected, there are several ways moo.el can make your
life easier, particularly if you're connecting to a MOO.  The ones I use
most often are multiple buffers, multiple windows, verb and property editing,
and general nifty things you can do with your buffer when you can edit the
whole thing with EMACS commands.

* Multiple Buffers *

     Like I said up above about .moo_worlds, you can connect to a mud more
than once, using multiple buffers.  With multiple buffers you can hop from
one mud connection to another and work on two or more muds, or edit files,
and so on.  Buffers are part of EMACS, and are generally nifty things that
you can learn more about with the EMACS manual.  One thing to keep in 
mind is that the buffer sticks around until you kill it - out of sight does
NOT mean out of mind.  

* Switching Between Buffers *

     You switch between buffers using: 

Ctrl-x b 
Switch to buffer: (default: blahblah) [enter]

     If you just hit enter you'll go to the default buffer.  The default
buffer is the last buffer you were in, in this window (more about windows
next).  For just two buffers, this is fine, you can do Ctrl-x b forever and
keep going back and forth.  If you have more than one buffer, you can type
part of the buffer name and use command completion or ? to see the other
buffer names. 

* Opening New Buffers *

     You can also open new buffers to edit text or whatever, simply by
switching to a buffer that isn't there.

Ctrl-x b 
Switch to buffer: newbuffername [enter]

* Killing Buffers *

     Generally I don't close buffers, I just @quit, or save the file I was
editing, and ignore it until I'm ready to kill the whole EMACS.  But if
you want to or need to make it go away, you can use:

Esc x kill-buffer [enter]
Kill buffer: (default blahblah)

    You can specify which buffer to kill the same way you specify which
buffer to switch to.

* Uploading Buffers *

     You can send the contents of a buffer to the mud with the command:

Esc x mud-upload-buffer [enter]

     EMACS will ask you for the buffer to upload, and the mud to upload it
to.  You can also use 

* Quitting from a MUD *

     If you want to @quit from a mud, then reconnect (to connect to
another character, for example), I've found you have to @quit, wait a
few seconds until it says:

|*** Disconnected ***

     then press [enter] a couple of times.  It'll say:

Process MUD<1> exited abnormally with code 256

     And now you can do:

Esc x mud [enter] mudname [enter] 

     and reconnect.

* Multiple Windows *

     Multiple windows are like multiple buffers (in fact, they usually ARE 
multiple buffers), only they're on the same 24 line screen.  Right now,as I
type this, I have about 10 lines for this document on the top half 
of my screen, and the bottom half contains two windows, one for a LambdaMOO
session and one for a GodNet session.

* How Many Windows Is Too Many? *

     You can keep opening more windows until all you have left on your screen
is window bars (solid light bars that separate the windows).  For the most
part, two windows is optimal to work with, three if two of them aren't too 
busy, and four is pushing it.  If I have to keep track of more buffers than
this, I generally switch buffers in and out.

* The Windows Commands *

The windows commands are generally:

Ctrl-x 2  separate the present window into two windows.
Ctrl-x 1  shut down all of the windows except the one the cursor is in.
Ctrl-x o  hop to the next window.
Ctrl-x ^  (^ is shift-6 on most keyboards) expand the window you're in by
          1 line.  This one is tricky, it takes a line away the "closest"
          window, a not-always-predictable choice.

* Verb and Property Editing *

     The MOO verb and property editor functions in moo.el automagically
open up windows to edit verbs and properties (aka fields):

Esc x moo-get-verb #object:verbname [enter]
     and
Esc x moo-get-field #object.propertyname [enter]

     These commands also pull a copy of the verb or property contents into
the buffer.  Once you've finished editing the verb or property, you can
send it back to the MOO with:

Esc x mud-macro-send [enter]

* Editing Long List Properties * 

     A property is basically one line, often an extremely long line.  If
you're editing a property that's a list of elements or strings, separated
by commas, there are useful commands for breaking the list up into separate
lines for editing and recombining them into a list for sending:

Esc x moo-explode-list [enter]
Esc x moo-implode-list [enter]

     If the list is a list of strings, with quotes (") at either end, use:

Esc x moo-explode-message [enter]
Esc x moo-implode-message [enter]

     This will strip off the quotes until you're ready to implode the
message.

* Quoting text * 

     It's often very useful to clip out text and send it to a mud, to
"quote" it to other players who are listening, or to send a long series 
of commands, or even to send a mail message inside MOO.  Once you've put
together the text you're going to send, clip or copy it into the kill ring
(see below for details on doing this) then use:

Esc x mud-send-kill [enter]

     This sends the text verbatim.  If you wanted to put a command in front
of every line, for example you wanted to "say" or "emote" every line, you
could use:

Esc x mud-send-kill-prefix [enter]
Prefix: say [enter]
Suffix: [enter]

* @quicksending mail *

     If you're like me, you don't like using Lambda's mail editor (nice
though it is, and kudos to Rog for coding it) to edit your mail.  You can
edit it in another buffer, place "@quicksend recipient-name" at the
beginning and "." at the ending, and use x mud-upload-buffer or
mud-send-kill to send it.

* Nifty Things EMACS can do *

     EMACS is a very powerful and useful editor.  I even use an EMACS
clone (JOVE - Jonathan's Own Version of EMACS) on my PC.  To really
learn about it you should dig up a GNU EMACS manual or file or try 'learn 
EMACS' or te EMACS help function (Esc x help-for-help).  GNU EMACS (in my
opinion the best version, although it devours  UP CPU and is a real memory
hog) is available free on the Internet.  You can FTP the documentation
files from numerous archive sites (wuarchive.wustl.edu is my favorite site).

* Quitting EMACS *

     Methods for quitting from EMACS vary depending on how the version in
use is set up.  Ctrl-c c, ctrl-x c, ctrl-c ctrl-c, etc, often do the job.
When I can't do it any other way, this almost always works:

Esc x kill-emacs [enter]

* Logging *

     If you decide you want to save a log of a mud session, do:

Ctrl-x Ctrl-w
Write file: ~/filename

* Moving Around *

     Sometimes you can use the keyboard arrow keys to move around,
sometimes not.  When you can't, remember these commands:

Ctrl-f  forward one space.
Ctrl-b  backwards one space.
Ctrl-p  previous line.
Ctrl-n  next line.
Ctrl-a  beginning of line.
Ctrl-e  end of line.
Ctrl-d  deletes a character the cursor is on.

     The mud session takes any line you press [enter] on as input.  So if
you mistype something, you can easily use Ctrl-p to go back up, Ctrl-b
or Ctrl-f to get to your mistake, and Ctrl-d or backspace to fix it,
then press [enter] and send it again.  When I want to repeat an action
many times however, I kill it and yank it back multiple times (see 
cutting and pasting, below).

* Macro-movement Commands *

     There are also some useful commands for moving around the buffer by
large steps:

Ctrl-v  move down one screenfull.
Esc v   move up one screenfull.
Esc <   move to beginning of file.
Esc >   move to end of file.

* Cutting, Pasting, Etc *

     A couple of basic concepts;  mark, region, kill, kill ring.  

     The mark is just that, a mark.  You usually can't see it.  Sometimes
it's represented by a highlighted space, sometimes not.  The Ctrl key to
set it varies from terminal to terminal, so I just remeber Esc x set-mark
and I have no problems.

     The region is everything between your cursor and wherever the mark was
last set.  Everything.  This is very useful for deleting or changing large
areas of text, but can be dangerous if you forget where the mark last was.

     Killing a line means deleting from the cursor to the end of the line.
To really delete the whole line you have to do it twice - once to kill the
text, another time to kill the empty space.  Ctrl-k usually does kill this.
You can also kill an entire region with Ctrl-w.  This is something you have
to be careful about, or you could end up killing large regions you wanted to
keep.  Fortunately you have the kill ring.

     Killed text all goes into the kill-ring.  You can "yank" back all of
the text that you last killed in one "contiguous" batch with Ctrl-y.  This
means that if you kill five lines in a row by pressing Ctrl-k ten times,
Ctrl-y will yank them all back.  But if you press Ctrl-k ten times, then
use Ctrl-n to move somewhere else and do Ctrl-k four more limes, you're
only going to be able to yank back the last batch (the four lines) you
killed.

     If you don't want to kill anything, you can just set the mark, move to 
the end of the area you want, and do Esc x copy-region to copy those lines
into the kill ring just as if you'd killed them.

     There are commands for moving around the kill ring;  check EMACS help
or your EMACS manual.

Esc x set-mark     set the mark.
Ctrl-k             kill to end of line.
Ctrl-w             kill region.
Ctrl-y             yank back last contiguous kill.
Esc x copy-region  copy region into kill-ring.

* Mud- commands * 

mud-add-world                      mud-beginning-of-line
mud-cancel-input                   mud-cleanup-extra-processes
mud-get-text                       mud-interactive-mode
mud-load-macro-commands            mud-load-worlds
mud-macro-abort                    mud-macro-command
mud-macro-expansion-mode           mud-macro-label
mud-macro-send                     mud-macro-send-and-destroy
mud-macro-send-slowly              mud-mode
mud-next-command                   mud-output-here
mud-parse-entry-file               mud-previous-command
mud-previous-matching-command      mud-quit
mud-realign-and-send               mud-recover-last-macro
mud-remove-macro                   mud-retarget
mud-send                           mud-send-kill
mud-send-kill-prefix               mud-shell-buffer
mud-store-macro-commands           mud-upload-buffer
mud-upload-file                    mud-upload-file-as-lambda-mail
mud-upload-file-straight